Holiday Gift Guide 2026 is live →

Patterns

T Rex Crochet Pattern (Amigurumi T Rex)

Crochet a cute amigurumi T rex with tiny arms and a big smile in about seven hours, then gift it to a dinosaur fan or keep it on your shelf.

Cute handmade green crochet amigurumi T rex dinosaur plush with tiny arms, a big friendly smile and white felt teeth sitting on a wooden table in a bright nursery

Patterns · Crochet

Finished size
10 in tall
Making time
7 hours
Hook
US G-6 (4.0 mm)
Set
T rex, spikes
Skill
Easy to Intermediate
Jump to the pattern
In this post
  1. Key Takeaways
  2. Table of Contents
  3. Why You Will Love This T Rex
  4. Finished Size, Skill Level, and Time
  5. Materials You Need
  6. Abbreviations (US Terms)
  7. Gauge and Sizing Notes
  8. Part 1: The Head and Body
  9. Part 2: The Arms, Legs, and Tail
  10. Part 3: The Face, Teeth, and Assembly
  11. Variations: Colors, Sizes, and Uses
  12. Troubleshooting a T Rex That Does Not Look Right
  13. Care Instructions
  14. Frequently Asked Questions

A crochet T rex is the friendliest dinosaur you will ever make. This free T rex crochet pattern makes a cute amigurumi Tyrannosaurus rex in soft green yarn, with tiny two-fingered arms, a big smile, white felt teeth, and a long tail. It stands about 10 inches tall, a wonderful gift for a dinosaur loving child.

This is an original Little Loop Finds design, written in US terms and completely free. The T rex is worked in the round with simple single crochet, then stuffed and sewn together, so it is a great first amigurumi dinosaur.

A quick note on scope: this post is about one specific crochet dinosaur, an amigurumi Tyrannosaurus rex with tiny arms and a big smile. If you want a different prehistoric friend, our triceratops crochet pattern is a good match.

Key Takeaways

  • Free original pattern: a Little Loop Finds original design, written in US terms, and completely free.
  • A friendly T rex: an amigurumi Tyrannosaurus rex with tiny arms, a big smile, and white felt teeth.
  • A 10 inch plush: about 10 inches tall when finished, perfect for hugs and shelf display.
  • Simple stitches: worked in the round with single crochet, increases, and decreases only.
  • A 7 hour project: one T rex takes about 7 hours.

Table of Contents

Why You Will Love This T Rex

A crochet T rex turns a fierce dinosaur into a soft friend. The big head, the tiny arms, and the wide smile make it funny instead of scary. Give it to a child who loves dinosaurs, or keep it on your desk.

The pieces are simple rounds of single crochet, each small enough to finish in one sitting. The arms are so tiny they take only minutes, and the sewing and the face bring it to life in a very rewarding way.

The tiny arms are the best part, because they are what makes a T rex a T rex.

Finished Size, Skill Level, and Time

  • Finished size: about 10 inches tall and 7 inches long from nose to tail, sitting upright. The head is about 4 inches wide, and the body is about 5 inches wide at the belly.
  • Skill level: Easy to Intermediate. You need a magic ring, single crochet, increases, decreases, and basic seaming. Safety eyes are optional, and the face can be embroidered instead.
  • Time: about 7 hours per T rex: 2 hours for the head and body, 2 hours for the small pieces, 2 hours for the face and assembly, and 1 hour for finishing.
Handmade sage green crochet amigurumi T rex dinosaur plush with tiny two-fingered arms and a big smile held in a child's hands in a sunny living room

Materials You Need

ItemWhat to get
Yarn, main colorWorsted weight yarn in sage green, 250 yards
Yarn, belly colorWorsted weight yarn in cream, 80 yards
Yarn, accent colorWorsted weight yarn in dark green, 30 yards, for the back spikes
HookUS G-6 (4.0 mm), or the size that gives you the gauge below
Eyes12 mm black safety eyes, 1 pair, or black yarn for embroidery
FeltWhite craft felt, small piece, for the teeth
NotionsPolyester stuffing, tapestry needle, scissors, tape measure, stitch markers, pins

Soft worsted weight yarn is the best choice for an amigurumi T rex because it is sturdy, easy to see while you stitch, and makes a plush that holds its shape. Avoid very fuzzy yarns, because they hide the stitches and make the face hard to see.

Safety eyes give the T rex a bright, finished look, but they are not safe for children under three. For a young child, embroider the eyes with black yarn instead. White craft felt is the easiest way to make the teeth: cut small triangles and sew them along the smile.

Abbreviations (US Terms)

  • MR = magic ring
  • ch = chain
  • sl st = slip stitch
  • sc = single crochet
  • hdc = half double crochet
  • dc = double crochet
  • inc = increase (2 sc in the same stitch)
  • dec = decrease (sc 2 together)
  • st(s) = stitch(es)
  • rep = repeat
  • RS = right side
  • FO = fasten off

Gauge and Sizing Notes

Gauge matters on amigurumi because the stitches must be tight enough that the stuffing does not show through. Work a swatch of 12 sc and 12 rows in the main color. It should be about 3 inches wide and 3 inches tall. If it is wider, go down a hook size. If it is narrower, go up a hook size.

You can change the size easily. Use a thinner yarn and a smaller hook for a mini T rex about 6 inches tall, or a chunky yarn and a larger hook for a big T rex about 14 inches tall. Keep the same stitch counts. Stuff the pieces firmly as you go. Our free crochet dinosaur pattern uses the same tight stitch gauge if you want to practice the tension on a simpler dinosaur first.

Part 1: The Head and Body

The head and body are the two biggest pieces of the T rex, and both are worked in the round from the top down. Make both pieces, stuff them firmly, and set them aside before you make the smaller parts.

The Head

With the main color, work in continuous rounds. Place a stitch marker at the start of each round and move it up as you go.

  • Round 1: MR, 6 sc in the ring. (6)
  • Rounds 2 to 6: inc 6 sts each round, working (sc, inc), (2 sc, inc), (3 sc, inc), then (4 sc, inc), ending with 36 sts.
  • Rounds 7 to 10: sc in each st around. (36)
  • Round 11: (4 sc, dec) rep 6 times. (30)
  • Round 12: (3 sc, dec) rep 6 times. (24)
  • Round 13: sc in each st around. (24)
  • Round 14: (2 sc, dec) rep 6 times. (18)

Stuff the head firmly, shaping it into a wide rounded shape with a slightly flat front for the snout. Add the safety eyes between rounds 9 and 10, about 6 stitches apart, before you close the head.

  • Round 15: (sc, dec) rep 6 times. (12)
  • Round 16: dec 6 times. (6)

Fasten off and close the hole. The head should be about 4 inches wide and 3 inches tall, with a flat front where the smile and teeth will go.

The Body

With the main color, work in continuous rounds.

  • Round 1: MR, 6 sc in the ring. (6)
  • Rounds 2 to 7: inc 6 sts each round, working (sc, inc) up to (5 sc, inc), ending with 42 sts.
  • Rounds 8 to 13: sc in each st around. (42)
  • Round 14: (5 sc, dec) rep 6 times. (36)
  • Round 15: (4 sc, dec) rep 6 times. (30)
  • Round 16: (3 sc, dec) rep 6 times. (24)

Stuff the body firmly, shaping it into a round belly that is wider at the bottom than at the top.

  • Round 17: (2 sc, dec) rep 6 times. (18)
  • Round 18: (sc, dec) rep 6 times. (12)
  • Round 19: dec 6 times. (6)

Fasten off and close the hole the same way as the head. The body should be about 5 inches wide at the belly and 5 inches tall. Our crochet dragon pattern free uses the same round body shaping if you want to practice the increases on a simpler creature first.

The Belly Patch

With the belly color, work flat in rows to make an oval patch for the front of the body.

  • Row 1: ch 8, sc in the 2nd ch from the hook, sc in each ch across. Turn. (7)
  • Rows 2 to 4: inc at both ends on rows 2 and 4, working straight on row 3, ending with 11 sts.
  • Rows 5 to 10: ch 1, sc in each st across. Turn. (11)
  • Rows 11 to 13: dec at both ends on rows 11 and 13, working straight on row 12, ending with 7 sts.

Fasten off, leaving a long tail for sewing. The belly patch should be about 4 inches tall and 3 inches wide.

Part 2: The Arms, Legs, and Tail

The arms are famously tiny, with two little fingers each. The legs are short and sturdy so the T rex can sit up, and the tail is long and tapers to a point. Make all of these pieces before you start the face.

The Arms (make 2)

With the main color, work in continuous rounds.

  • Round 1: MR, 6 sc in the ring. (6)
  • Round 2: (sc, inc) rep 3 times. (9)
  • Rounds 3 to 5: sc in each st around. (9)
  • Round 6: (sc, dec) rep 3 times. (6)

Fasten off, leaving a long tail for sewing. Stuff the arm very lightly and flatten the top edge. The arm should be about 2 inches long. Make the second arm the same way.

The Fingers

With the main color, work two tiny fingers on the end of each arm. Join the yarn at the front of the arm tip, ch 3, and sl st back into the same stitch to make a small loop. Work a second finger right beside the first one, about 2 stitches away. Repeat on the second arm so both arms have two fingers each.

The Legs (make 2)

With the main color, work in continuous rounds.

  • Round 1: MR, 6 sc in the ring. (6)
  • Round 2: inc in each st around. (12)
  • Round 3: (sc, inc) rep 6 times. (18)
  • Rounds 4 to 7: sc in each st around. (18)
  • Round 8: (sc, dec) rep 6 times. (12)
  • Round 9: sc in each st around. (12)

Fasten off, leaving a long tail for sewing. Stuff the leg firmly. The leg should be about 3 inches tall. Make the second leg the same way, and flatten the top edge of each leg before sewing.

The Tail

With the main color, work in continuous rounds.

  • Round 1: MR, 6 sc in the ring. (6)
  • Round 2: (sc, inc) rep 3 times. (9)
  • Round 3: sc in each st around. (9)
  • Rounds 4 to 8: inc 3 sts on rounds 4 and 8, working (2 sc, inc) then (3 sc, inc), ending with 15 sts.
  • Rounds 9 to 12: sc in each st around. (15)

Fasten off, leaving a long tail for sewing. Stuff the tail firmly. The tail should be about 5 inches long. Bend it gently into a slight curve, because a curved tail helps the T rex balance when it sits.

Close-up of hands crocheting a green amigurumi T rex dinosaur head with a crochet hook, showing single crochet stitches, safety eyes and a smiling mouth in progress on a wooden table

Part 3: The Face, Teeth, and Assembly

This is the part where the pieces become a T rex. Sew the head to the body, attach the arms, legs, and tail, add the back spikes, and finish the face with a smile and teeth.

Sewing the Head and Body Together

Pin the head to the top of the body, centered, with the flat snout facing forward. With the main color and a tapestry needle, whipstitch the head to the body all the way around. Add a little more stuffing through the gap before you close the last few stitches, so the neck is firm and the head does not wobble.

Attaching the Belly Patch, Arms, Legs, and Tail

Sew the belly patch to the front of the body with the long tail, working small whipstitches around the whole oval edge.

Sew the arms to the sides of the body, just below the head, with the fingers pointing forward. Sew the legs to the bottom of the body, spaced about 2 inches apart, with the feet pointing forward. Sew the tail to the back of the body, centered, about halfway up, with the curve pointing down so it acts as a third leg.

The Back Spikes

With the accent color, work 5 small spikes down the back of the T rex, from the top of the head to the tip of the tail. For each spike, join the yarn at the spot, ch 4, work 1 sc in the 2nd ch from the hook, 1 hdc in the next ch, and 1 dc in the last ch, then sl st into the same spot to anchor it. Space the spikes about 1 inch apart. Our crochet lizard pattern free uses the same spike method if you want to practice the shape on a smaller creature first.

The Smile and Teeth

Embroider the smile with black yarn and a tapestry needle, working a wide curved line across the front of the face in a big friendly U shape.

Cut 6 small triangles from the white felt, each about half an inch wide and tall. Sew or glue them along the smile line, 3 on the top edge and 3 on the bottom edge. If you are embroidering the eyes, add them now, two French knots above the smile, about 6 stitches apart.

Final Finishing

Check the whole T rex from every side. Both arms should be the same length, both legs should sit flat, and the tail should touch the floor so the T rex sits upright without tipping. Add a little more stuffing to any piece that feels soft, and weave in all the loose ends.

Close-up of a handmade green crochet amigurumi T rex dinosaur plush showing its tiny two-fingered arms, textured single crochet stitches and big friendly smile with white felt teeth

Variations: Colors, Sizes, and Uses

  • Classic green T rex: work the whole dinosaur in sage green with a cream belly and dark green spikes.
  • Blue baby T rex: make the body in soft blue with a white belly for a nursery gift.
  • Purple party T rex: work the T rex in purple with pink spikes for a fun birthday gift.
  • Mini T rex: use a thinner yarn and a smaller hook for a mini T rex about 6 inches tall, perfect for a keychain or a desk friend.
  • Big cuddly T rex: use a chunky yarn and a larger hook for a big T rex about 14 inches tall, perfect for hugs.

Troubleshooting a T Rex That Does Not Look Right

  • My stuffing shows through the stitches. The gauge is too loose. Go down a hook size, or work the stitches a little tighter, so the fabric hides the stuffing.
  • My T rex will not sit up. The legs are too far apart, or the tail is too high. Move the legs closer together and sew the tail lower, so it touches the floor and acts as a third leg.
  • My head wobbles. The neck needs more stuffing. Add stuffing through the seam before you close it, and sew the head to the body with two rows of stitches instead of one.
  • My smile looks crooked. The embroidery was worked freehand. Mark the smile curve with pins first, then embroider along the pins for a smooth, even line.
  • My arms look too long. The arms were worked too many rounds. A T rex arm should be about 2 inches long, so take out one round and rework the tip.
  • My spikes flop over. The spikes are too tall for the yarn weight. Work them one chain shorter, or stiffen them with a little fabric stiffener spray.

Care Instructions

Hand wash a crochet T rex in cool water with a mild detergent, and press the water out gently without wringing. Reshape the head, body, and tail, and lay it flat to dry away from direct heat. Do not put an amigurumi T rex in the washing machine or the dryer, because the tumbling can felt the yarn and loosen the safety eyes. Store the T rex on a shelf or in a toy basket.

Frequently Asked Questions

Is this T rex crochet pattern good for beginners?

It is best for an easy to intermediate crocheter. You need a magic ring, single crochet, increases, decreases, and basic seaming. One T rex takes about 7 hours.

What yarn is best for an amigurumi T rex?

Worsted weight yarn is the best choice, because it is sturdy, easy to see while you stitch, and makes a plush that holds its shape. Avoid very fuzzy yarns, because they hide the stitches and make the face hard to see.

Are safety eyes safe for a child?

Safety eyes are fine for children over three, but not safe for children under three. For a very young child, embroider the eyes with black yarn instead.

How do I make the T rex bigger or smaller?

Use the same stitch counts and only change the yarn and hook. A thinner yarn and a smaller hook makes a mini T rex about 6 inches tall, and a chunky yarn and a larger hook makes a big T rex about 14 inches tall.

How do I make the tiny arms?

Each arm is a small tube of 6 to 9 stitches, worked in the round, about 2 inches long. The two fingers are small chain loops worked into the tip of the arm.

Can I sell T rex plushies made from this pattern?

Yes, you may sell finished T rex plushies made from this free pattern, with credit to Little Loop Finds. Do not sell or republish the pattern text itself. A green T rex with a matching triceratops crochet pattern makes a lovely pair for a market stall.

Finished handmade green crochet amigurumi T rex dinosaur plush with tiny arms and a big smile sitting on a child's bed beside dinosaur picture books

Happy stitching, and may your little T rex bring big smiles to every dinosaur fan you know.