Manatee Crochet Pattern (Free Amigurumi)
Crochet a soft grey manatee plush with a rounded body and a wide paddle tail in about four hours, then gift it to an ocean lover.

Patterns · Crochet
- Finished size
- 9 in long
- Making time
- 4 hours
- Hook
- US G-6 (4.0 mm)
- Set
- Body, tail, head
- Skill
- Easy
In this post
- Key Takeaways
- Table of Contents
- Why You Will Love This Manatee
- Finished Size, Skill Level, and Time
- Materials You Need
- Abbreviations (US Terms)
- Gauge and Sizing Notes
- Part 1: The Body and the Paddle Tail
- Part 2: The Head, Flippers, and Snout
- Part 3: Assembly and Face
- Variations: Colors, Sizes, and Uses
- Troubleshooting a Manatee That Does Not Look Right
- Care Instructions
- Frequently Asked Questions
- More Free Patterns to Try
A crocheted manatee is one of the gentlest little amigurumi animals you can make, and this free manatee crochet pattern turns soft grey yarn into a cute amigurumi manatee plush with a rounded body, a wide paddle tail, and tiny flippers. It takes about 4 hours and makes a lovely gift for an ocean lover.
This is an original Little Loop Finds design, written in US terms and completely free. The manatee is made from a rounded grey body, a flat paddle tail, two small flippers, a soft snout, and a sweet face, all worked in single crochet in the round.
A quick note on scope: this post is about one specific crochet manatee, a grey amigurumi sea cow plush with a rounded body and a paddle tail. That makes it different from the other sea animals on this site. A crochet whale pattern makes a whale with a forked tail and a spout, a free crochet dolphin pattern makes a sleek dolphin with a curved beak, and a crochet shark pattern makes a shark with a pointed snout and fins. This pattern makes a slow, gentle manatee, not a whale, a dolphin, or a shark.
Key Takeaways
- Free original pattern: a Little Loop Finds original design, written in US terms, completely free.
- A manatee plush: a soft grey amigurumi manatee with a rounded body, a wide paddle tail, and tiny flippers, about 9 inches long.
- Simple stitches: worked in the round with single crochet, increases, and decreases only.
- A 4 hour project: one manatee takes about 4 hours, worked one piece at a time.
- Great for gifts: a sweet gift for an ocean lover, a baby shower present, or a shelf friend.
Table of Contents
- Why You Will Love This Manatee
- Finished Size, Skill Level, and Time
- Materials You Need
- Abbreviations (US Terms)
- Gauge and Sizing Notes
- Part 1: The Body and the Paddle Tail
- Part 2: The Head, Flippers, and Snout
- Part 3: Assembly and Face
- Variations: Colors, Sizes, and Uses
- Troubleshooting a Manatee That Does Not Look Right
- Care Instructions
- Frequently Asked Questions
- More Free Patterns to Try
Why You Will Love This Manatee
A crocheted manatee is a small project with a big payoff. The pieces are quick, so you can finish one flipper in about 10 minutes, and the finished manatee sits nicely on a shelf, a desk, or a nursery windowsill.
The manatee is worked in the round, so there are no rows to count. You start with a magic ring, increase evenly to make a rounded body, and work the head and the tail the same way. The color changes are simple, because you only change color at the start of a round, and most of the manatee is one soft grey.
This manatee also makes a wonderful gift for an ocean lover. The rounded body looks soft and huggable, the paddle tail is wide and flat like a real manatee tail, and the tiny flippers sit close to the body. Ocean lovers love it because manatees are gentle and calm, and this little plush captures that peaceful feeling. It also makes a sweet baby shower gift, because the manatee is soft, round, and friendly, with no sharp edges.
The pattern is written in one size, about 9 inches long, which is a good size for a shelf friend or a cuddle toy. If you have never made an amigurumi sea animal before, this manatee is a kind and forgiving first project, because the rounded body hides small mistakes and the flat tail is easy to shape.
Finished Size, Skill Level, and Time
- Finished size: one size. The manatee is about 9 inches long from snout to tail, and about 4 inches wide across the body. The paddle tail is about 3 inches wide.
- Skill level: Easy. You need a magic ring, single crochet, increases, decreases, and simple color changes.
- Time: about 4 hours per manatee: 1 hour for the body, 45 minutes for the head and snout, 30 minutes for the paddle tail, 20 minutes for the two flippers, and 45 minutes for assembly.

Materials You Need
| Item | What to get |
|---|---|
| Yarn, grey | DK weight yarn in soft grey, about 150 yards |
| Yarn, pink | DK weight yarn in pale pink, about 20 yards |
| Hook | US G-6 (4.0 mm), or the size that gives you the gauge below |
| Notions | Tapestry needle, scissors, stitch markers, polyester fiberfill, 2 safety eyes (10 mm), pink embroidery floss |
Soft grey DK yarn is the best choice for a manatee because it looks like the real animal, gentle and calm. A pale pink DK yarn works best for the snout, because the soft pink looks like a sweet little nose. Use the same brand and weight for both colors.
A stitch marker is the most important notion here, because grey yarn makes it hard to see your stitches. Use dark safety eyes for a sweet face, and keep pink embroidery floss ready for the mouth and the tiny nostrils.
Abbreviations (US Terms)
- ch = chain
- sl st = slip stitch
- sc = single crochet
- inc = increase (2 sc in the same stitch)
- dec = decrease (sc 2 together)
- st(s) = stitch(es)
- rep = repeat
- MR = magic ring
- FO = fasten off
Gauge and Sizing Notes
Gauge matters on amigurumi because the stuffing shows through if the stitches are too loose. Work a swatch of 12 sc and 14 rounds. It should be about 2 inches wide and 2 inches tall.
The pattern is written in one size, about 9 inches long and 4 inches wide. To make a smaller manatee, stop the body after round 6, which gives a manatee about 7 inches long. To make a larger manatee, add one more increase round to the body and the head. The tail stays the same size in every version, because a wide paddle tail suits a manatee of any size.
Part 1: The Body and the Paddle Tail
The manatee starts with the body, a rounded tube worked in grey yarn, with a wide flat paddle tail at one end and a soft head at the other. Work it in a spiral in the round, with a stitch marker in the first stitch.
With the grey yarn, make a magic ring for the body.
- Round 1: 6 sc in the ring. (6)
- Round 2: inc in each st around. (12)
- Round 3: (sc in the next st, inc in the next st) rep 6 times. (18)
- Round 4: (sc in the next 2 sts, inc in the next st) rep 6 times. (24)
- Round 5: (sc in the next 3 sts, inc in the next st) rep 6 times. (30)
- Round 6: (sc in the next 4 sts, inc in the next st) rep 6 times. (36)
- Rounds 7-12: sc in each st around. (36)
- Round 13: (sc in the next 4 sts, dec) rep 6 times. (30)
- Round 14: (sc in the next 3 sts, dec) rep 6 times. (24)
- Round 15: (sc in the next 2 sts, dec) rep 6 times. (18)
- Round 16: (sc in the next st, dec) rep 6 times. (12)
- Round 17: dec in each st around. (6)
Stuff the body firmly before round 15, because the opening gets too small after that. Sl st in the next st and fasten off, leaving a 10 inch tail.
Count your stitches at the end of every increase round, because a missed increase will make the body lopsided instead of round. Grey yarn hides stitches well, so count out loud and feel for each stitch with your fingers.
The paddle tail is a wide flat shape worked in grey yarn, and it sits at the back end of the body. Work it flat in rows, not in the round. With the grey yarn, ch 10, then work 1 sc in the second ch from the hook and in each ch across. (9)
- Row 1: ch 1, turn, 2 sc in the first st, 1 sc in each of the next 7 sts, 2 sc in the last st. (11)
- Row 2: ch 1, turn, 2 sc in the first st, 1 sc in each of the next 9 sts, 2 sc in the last st. (13)
- Row 3: ch 1, turn, 1 sc in each st across. (13)
- Row 4: ch 1, turn, 1 sc in each st across. (13)
- Row 5: ch 1, turn, dec, 1 sc in each of the next 9 sts, dec. (11)
- Row 6: ch 1, turn, dec, 1 sc in each of the next 7 sts, dec. (9)
Work a round of sc evenly around the whole edge of the tail, placing 3 sc in each corner so the edge stays flat, then fasten off, leaving a 10 inch tail for sewing. Do not stuff the tail, because it should lie flat like a real manatee paddle.

Part 2: The Head, Flippers, and Snout
The head is a round ball worked in grey yarn, with a soft pink snout sewn on the front and two small flippers at the sides. Work each piece in a spiral in the round.
With the grey yarn, make a magic ring for the head.
- Round 1: 6 sc in the ring. (6)
- Round 2: inc in each st around. (12)
- Round 3: (sc in the next st, inc in the next st) rep 6 times. (18)
- Round 4: (sc in the next 2 sts, inc in the next st) rep 6 times. (24)
- Round 5: (sc in the next 3 sts, inc in the next st) rep 6 times. (30)
- Rounds 6-8: sc in each st around. (30)
- Round 9: (sc in the next 3 sts, dec) rep 6 times. (24)
- Round 10: (sc in the next 2 sts, dec) rep 6 times. (18)
- Round 11: (sc in the next st, dec) rep 6 times. (12)
- Round 12: dec in each st around. (6)
Stuff the head firmly with fiberfill before round 10. Sl st in the next st and fasten off, leaving a 10 inch tail for sewing.
The snout is a small rounded patch worked in pale pink yarn, and it sits on the lower front of the head.
- Round 1: 6 sc in the ring. (6)
- Round 2: inc in each st around. (12)
- Round 3: (sc in the next st, inc in the next st) rep 6 times. (18)
- Round 4: sc in each st around. (18)
- Round 5: (sc in the next st, dec) rep 6 times. (12)
- Sl st in the next st and fasten off, leaving a 8 inch tail for sewing.
Stuff the snout lightly with a pinch of fiberfill. The flippers are two small flat shapes worked in grey yarn. With the grey yarn, make a magic ring.
- Round 1: 6 sc in the ring. (6)
- Round 2: (sc in the next st, inc in the next st) rep 3 times. (9)
- Rounds 3-4: sc in each st around. (9)
- Round 5: (sc in the next st, dec) rep 3 times. (6)
Each flipper should be about 2 inches long. Do not stuff the flippers, because they should lie flat against the body. Fasten off, leaving a 8 inch tail for sewing. Make a second flipper the same way.

Part 3: Assembly and Face
Sew the head to the body first, then the paddle tail, then the flippers and snout, and add the face last.
Attaching the Head and Tail
Stand the body upright, and mark the front end. Take the head and pin it to the front of the body, with the snout facing forward. Thread a tapestry needle with the tail from the head, and sew the head to the body with a whip stitch around the join.
Take the paddle tail and pin it to the back end of the body, centered and flat. Thread a tapestry needle with the tail from the paddle, and sew it to the body with a whip stitch, working around the edge one stitch at a time. Check that the tail lies flat and points straight back before you sew the last stitches.
Attaching the Flippers and Snout
Turn the body on its side, and mark two spots for the flippers, one on each side about halfway down the body. Pin each flipper to its spot and sew it on with a whip stitch around the open end. The flippers should point down and slightly back, like a real manatee resting.
Sew the pink snout to the lower front of the head, centered below the eyes. Stuff the snout lightly before you close the last stitches, so it stays soft and rounded.
Adding the Face
Place the safety eyes on the head, about 1 inch apart and just above the snout. Push the eyes through the stitches from the front, and press the washers on firmly from the inside. If you add the eyes after stuffing, use embroidered eyes instead, with black yarn and a French knot for each eye. Embroider a small mouth on the snout with pink floss, using a simple curved backstitch, and add two tiny nostrils above the mouth with a straight stitch each.
Variations: Colors, Sizes, and Uses
- Classic grey manatee: work the manatee in soft grey and pale pink yarn, exactly as written here.
- Dusty blue manatee: work the manatee in dusty blue and white yarn for a cooler ocean look.
- Baby manatee: stop the body after round 6 for a smaller manatee about 7 inches long, and keep the tail the same size.
- Manatee gift set: pair a manatee with a matching crochet octopus plush for an ocean set that looks planned.
Troubleshooting a Manatee That Does Not Look Right
- My manatee looks like a whale, not a manatee. The tail is too narrow or too pointed. Make the paddle tail as written, wide and flat, with 3 sc in each corner so the edge stays square.
- My tail curls up. The tail was stuffed, or the edge round was too tight. Do not stuff the tail, and work the edge round loosely so it lies flat.
- My manatee wobbles when it sits. The body was stuffed unevenly, or the head was sewn on off center. Stuff the body firmly and evenly, and check that the head sits centered before the last stitches.
- I cannot see my stitches in the grey yarn. The loops hide in the dark yarn, which is normal. Count out loud, feel for each stitch, and use a stitch marker in the first stitch of every round.
- My flippers stick out sideways. The flippers were sewn on too high or too far forward. Sew them low on the body, about halfway down, pointing down and slightly back.
Care Instructions
Hand wash a crocheted manatee in cool water with a mild detergent, and press the water out gently without wringing. Reshape the paddle tail, flippers, and snout and lay the manatee flat to dry. If the manatee is a child's toy, check the safety eyes now and then.
Frequently Asked Questions
Is this manatee crochet pattern good for beginners?
Yes, it is best for an easy crocheter who knows single crochet, increases, and decreases. The pieces are simple, and the rounded body hides small mistakes.
What yarn is best for a manatee?
Soft grey DK weight yarn is the best choice for a manatee, because it looks like the real animal. Use the same brand and weight for the grey and the pink. A cotton yarn also works if you prefer a firmer feel.
How is this different from the whale, dolphin, and shark patterns?
This pattern makes a gentle manatee plush with a rounded body and a wide flat paddle tail. The whale has a forked tail and a spout, the dolphin is sleek with a curved beak, and the shark has a pointed snout and fins. If you want a soft sea cow, make this one.
How big is the finished manatee?
The finished manatee is about 9 inches long from snout to tail and 4 inches wide across the body. The paddle tail is about 3 inches wide.
Can I make the manatee without safety eyes?
Yes, you can embroider the eyes instead, which is safer for babies and toddlers. Use black yarn and a French knot for each eye, about 1 inch apart just above the snout.
Can I sell manatees made from this pattern?
Yes, you may sell finished manatees made from this free pattern, with credit to Little Loop Finds. Do not sell or republish the pattern text.

More Free Patterns to Try
If you loved this manatee, try another free original pattern next. Make a crochet seashell pattern for a beachy companion piece, or a crochet turtle pattern for another slow and gentle sea friend.
Happy stitching, and may your little manatee bring a happy smile to every room it floats in.


