Crochet Cowboy Boots Pattern (Free Slippers)
Crochet tall cowboy boot slippers with a pointed toe, a small heel, and pull straps in about five hours, then gift them to a country fan.

Patterns · Crochet
- Finished size
- 11 in tall
- Making time
- 5 hours
- Hook
- US H-8 (5.0 mm)
- Set
- Foot, shaft, heel
- Skill
- Easy
In this post
- Key Takeaways
- Table of Contents
- Why You Will Love These Cowboy Boots
- Finished Size, Skill Level, and Time
- Materials You Need
- Abbreviations (US Terms)
- Gauge and Sizing Notes
- Part 1: The Foot, Toe, and Sole
- Part 2: The Tall Shaft, Heel, and Pull Straps
- Part 3: Assembly and Stitch Details
- Variations: Colors, Sizes, and Uses
- Troubleshooting Boots That Do Not Look Right
- Care Instructions
- Frequently Asked Questions
- More Free Patterns to Try
A pair of crocheted cowboy boots is one of the coziest western projects you can make, and this free crochet cowboy boots pattern turns brown, tan, and cream yarn into tall boot slippers with a pointed toe, a small heel, and pull straps, about 11 inches tall. They take about 5 hours for a pair and make a fun gift for a country music fan.
A quick note on scope: this post is about one specific crochet item, tall cowboy boot slippers for feet, with a pointed toe, a heel, and pull straps. A crochet cowboy hat pattern free makes a hat with a wide brim for a person to wear on their head. This pattern makes boots to wear on your feet, not a hat.
Key Takeaways
- Free original pattern: a Little Loop Finds original design, written in US terms, completely free.
- Cowboy boot slippers: tall boots with a pointed toe, a small heel, and pull straps, about 11 inches tall.
- Simple stitches: worked in the round and in rows with single crochet, half double crochet, and slip stitch only.
- A 5 hour project: one pair takes about 5 hours, worked one boot at a time.
- Great for gifts: a fun gift for a country music fan, a western party, or cozy winter mornings.
Table of Contents
- Why You Will Love These Cowboy Boots
- Finished Size, Skill Level, and Time
- Materials You Need
- Abbreviations (US Terms)
- Gauge and Sizing Notes
- Part 1: The Foot, Toe, and Sole
- Part 2: The Tall Shaft, Heel, and Pull Straps
- Part 3: Assembly and Stitch Details
- Variations: Colors, Sizes, and Uses
- Troubleshooting Boots That Do Not Look Right
- Care Instructions
- Frequently Asked Questions
- More Free Patterns to Try
Why You Will Love These Cowboy Boots
Crocheted cowboy boots are a small project with a big payoff. The foot works up quickly in the round, and the tall shaft is the fun part, because each row of cream stitching adds another western detail until the whole boot looks like it came from a rodeo shop. The boots also make a wonderful gift for a country music fan, because the brown leather look is warm and classic and the pull straps make them easy to slip on.
Finished Size, Skill Level, and Time
- Finished size: one size, adult medium. Each boot is about 11 inches tall from sole to top, and about 10 inches long from toe to heel. The foot fits a US women's size 7 to 9. The shaft is about 7 inches tall and about 13 inches around at the top.
- Skill level: Easy. You need a magic ring, single crochet, half double crochet, increases, decreases, and simple color changes.
- Time: about 5 hours per pair: 1 hour for the first foot and sole, 1 hour for the first shaft, 30 minutes for the heel and straps, then repeat for the second boot.

Materials You Need
| Item | What to get |
|---|---|
| Yarn, chocolate brown | Worsted weight yarn in chocolate brown, about 300 yards |
| Yarn, warm tan | Worsted weight yarn in warm tan, about 150 yards |
| Yarn, cream | Worsted weight yarn in cream, about 60 yards |
| Hook | US H-8 (5.0 mm), or the size that gives you the gauge below |
| Notions | Tapestry needle, scissors, stitch markers, leather or felt scraps for the sole (optional), non slip shelf liner (optional) |
Chocolate brown worsted yarn is the best choice for cowboy boots because it looks like real leather. A warm tan worsted yarn works best for the shaft panels, because the lighter color shows off the cream stitching. Use the same brand and weight for all colors so the pieces match in size and feel.
Abbreviations (US Terms)
- ch = chain
- sl st = slip stitch
- sc = single crochet
- hdc = half double crochet
- dc = double crochet
- inc = increase (2 sc in the same stitch)
- dec = decrease (sc 2 together)
- st(s) = stitch(es)
- rep = repeat
- MR = magic ring
- FO = fasten off
Gauge and Sizing Notes
Gauge matters on slippers because the boots need to fit feet, not just look right. Work a swatch of 12 hdc and 10 rows. It should be about 4 inches wide and 4 inches tall.
The pattern is written in one size, adult medium, fitting a US women's size 7 to 9. To make a smaller pair, use a US G-6 (4.0 mm) hook, which gives boots about 10 inches long. To make a larger pair, use a US I-9 (5.5 mm) hook, which gives boots about 11 inches long.
Part 1: The Foot, Toe, and Sole
Each boot starts with the foot, a rounded tube worked in chocolate brown yarn, with a pointed toe at the front and a sturdy sole underneath. Work it in a spiral in the round, with a stitch marker in the first stitch. Make two feet the same way, one for each boot.
With the chocolate brown yarn, make a magic ring for the foot.
- Round 1: 6 sc in the ring. (6)
- Round 2: inc in each st around. (12)
- Round 3: (sc in the next st, inc in the next st) rep 6 times. (18)
- Round 4: (sc in the next 2 sts, inc in the next st) rep 6 times. (24)
- Round 5: (sc in the next 3 sts, inc in the next st) rep 6 times. (30)
- Rounds 6-8: sc in each st around. (30)
- Round 9: (sc in the next 4 sts, inc in the next st) rep 6 times. (36)
- Rounds 10-14: sc in each st around. (36)
The foot should be about 7 inches long at this point. Try it on your foot now, because it is easy to adjust the length here.
Shape the pointed toe by working decreases at the front of the foot. Mark the center front stitch with a stitch marker, and work the next rounds in chocolate brown yarn.
- Round 15: sc in each st around to 3 sts before the marker, dec, sc in the next st, dec, sc in each st around. (34)
- Round 16: sc in each st around. (34)
- Round 17: sc in each st around to 3 sts before the marker, dec, sc in the next st, dec, sc in each st around. (32)
- Round 18: sc in each st around. (32)
- Round 19: sc in each st around to 3 sts before the marker, dec, sc in the next st, dec, sc in each st around. (30)
The toe should now point gently toward the front, like a real cowboy boot. Do not stuff the foot, because it is a slipper and your foot fills it.
The sole is a flat oval worked in chocolate brown yarn, and it is sewn under the foot to give the boot a sturdy base. With the chocolate brown yarn, ch 21, then work 1 sc in the second ch from the hook and in each ch across, and turn. Row 1: ch 1, sc in each st across (20). Row 2: ch 1, 2 sc in the first st, sc in the next 18 sts, 2 sc in the last st (22). Row 3: ch 1, sc in each st across (22). Row 4: ch 1, 2 sc in the first st, sc in the next 20 sts, 2 sc in the last st (24). Rows 5-9: ch 1, sc in each st across (24). Row 10: ch 1, dec, sc in the next 20 sts, dec (22). Row 11: ch 1, dec, sc in the next 18 sts, dec (20). Row 12: ch 1, sc in each st across (20). Fasten off, leaving a 12 inch tail for sewing. Make a second sole the same way. If you want a firmer sole, cut a matching oval from felt or thin leather and sew it under the crocheted sole. For extra grip on smooth floors, sew a small piece of non slip shelf liner to the bottom of each sole.
Count your stitches at the end of every increase round, because a missed increase will make the foot lopsided instead of smooth.

Part 2: The Tall Shaft, Heel, and Pull Straps
The shaft is a tall tube worked in warm tan yarn, with a cream stitch panel down the front. It is worked in rows that join into a tube, so you can see the panel grow row by row. Make two shafts the same way, one for each boot.
With the warm tan yarn, ch 42, then join with a sl st to the first ch to form a ring, taking care not to twist the chain. Work in a spiral in the round, with a stitch marker in the first stitch. Rounds 1-3: hdc in each st around (42). Round 4: change to cream yarn, hdc in each st around (42). Rounds 5-7: change to warm tan yarn, hdc in each st around (42). Round 8: change to cream yarn, hdc in each st around (42). Rounds 9-16: change to warm tan yarn, hdc in each st around (42). The shaft should be about 7 inches tall. The two cream rounds near the bottom and the middle look like the striped trim on a real boot shaft. Fasten off, leaving a 10 inch tail for sewing.
The stitch panel is a decorative strip of cream stitching down the front of the shaft. With the cream yarn and a tapestry needle, work a row of straight stitches down the center front of the shaft, from the top edge to the bottom edge. Make each stitch about 1 inch long, and space them about half an inch apart. Then work a second row just to the left of the first, and a third row just to the right, so the panel has three lines of cream stitching.
The heel is a small stacked block worked in chocolate brown yarn, and it sits under the back of the foot. With the chocolate brown yarn, ch 9, then work 1 sc in the second ch from the hook and in each ch across, and turn. Row 1: ch 1, sc in each st across (8). Rows 2-4: ch 1, sc in each st across (8). Row 5: ch 1, dec, sc in the next 4 sts, dec (6). Rows 6-7: ch 1, sc in each st across (6). Fasten off, leaving a 8 inch tail for sewing. Make a second heel the same way. The heel should be about 1.5 inches tall and about 2 inches wide.
The pull straps are two short loops worked in cream yarn, and they sit at the top sides of the shaft so you can pull the boots on. With the cream yarn, ch 11, then work 1 sc in the second ch from the hook and in each ch across, and turn. Row 1: ch 1, sc in each st across (10). Row 2: ch 1, sc in each st across (10). Fasten off, leaving a 6 inch tail for sewing. Make 4 straps the same way, two for each boot.

Part 3: Assembly and Stitch Details
Sew the shaft to the foot first, then the sole and heel, then the pull straps, and add the stitch details last.
Attaching the Shaft and Sole
Stand the foot upright, with the toe pointing forward. Take the shaft and pin it to the top of the foot, with the stitch panel side facing forward. The shaft opening should sit just above the ankle, and the bottom edge of the shaft should overlap the top of the foot by about 1 inch. Sew the shaft to the foot with a whip stitch around the join. Take the sole and pin it under the foot, centered from toe to heel, and sew it on with a whip stitch around the edge. Check that the boot stands flat before you finish the last side.
Attaching the Heel and Pull Straps
Turn the boot on its side, and mark the spot for the heel under the back of the foot, just in front of the shaft. Pin the heel to its spot and sew it on with a whip stitch around the top edge. The heel should sit flat on the ground when the boot stands up, so check the boot stands level before you sew the last side. Fold each pull strap in half to make a loop, and sew the two ends to the inside top edge of the shaft, one strap on each side. The loops should stick up about 1 inch above the top edge, so you can hook a finger through them to pull the boot on.
Adding the Stitch Details
Work the cream stitch panel down the front of the shaft, with three lines of straight stitches as described in Part 2. Then add a row of cream straight stitches around the top edge of the shaft, about half an inch below the rim, to look like the top trim on a real boot.
Variations: Colors, Sizes, and Uses
- Classic brown boots: work the boots in chocolate brown, warm tan, and cream yarn, exactly as written here.
- Black boots: work the boots in black and dark grey yarn with cream stitching for a classic black cowboy boot look.
- Kids boots: use a US G-6 (4.0 mm) hook and stop the foot after round 12 for a child size pair about 7 inches long.
- Boot gift set: pair the boots with a matching crochet belt pattern for a western set that looks planned.
Troubleshooting Boots That Do Not Look Right
- My boots will not stay up. The shaft is too loose, or the yarn is too soft. Work the shaft in a tighter gauge, or add a round of slip stitch around the top edge to firm it up.
- My toe looks round, not pointed. The decrease rounds were skipped or worked in the wrong spot. Mark the center front stitch first, and work the decreases right at the front on rounds 15, 17, and 19.
- My boots slide on smooth floors. The soles have no grip. Sew a piece of non slip shelf liner or felt to the bottom of each sole.
- My second boot looks different from the first. The stitch counts drifted between boots. Count your stitches at the end of every round, and make the second boot right after the first while the counts are fresh.
Care Instructions
Hand wash crocheted cowboy boot slippers in cool water with a mild detergent, and press the water out gently without wringing. Reshape the shaft, toe, and heel and lay the boots flat to dry.
Frequently Asked Questions
Is this crochet cowboy boots pattern good for beginners?
Yes, it is best for an easy crocheter who knows single crochet, half double crochet, increases, and decreases. The shaft is worked in simple rounds, and the stitch panel is basic embroidery with a tapestry needle.
What yarn is best for cowboy boot slippers?
Chocolate brown, warm tan, and cream worsted weight yarn is the best choice for cowboy boots, because the deep brown looks like real leather. Use the same brand and weight for all colors.
Chocolate brown, warm tan, and cream worsted weight yarn is the best choice for cowboy boots, because the deep brown looks like real leather. Use the same brand and weight for all colors. A wool blend yarn also works if you want extra warmth.
Are these boots for wearing outside?
No, these are cozy indoor slippers shaped like cowboy boots, not outdoor boots. They are perfect for wearing around the house, and the felt or leather sole gives them a sturdy base on indoor floors.
How is this different from the cowboy hat pattern?
This pattern makes tall cowboy boot slippers to wear on your feet. The cowboy hat pattern makes a wide brim hat to wear on your head. They are two different items, and they make a fun matching set.
This pattern makes tall cowboy boot slippers to wear on your feet, with a pointed toe, a heel, and pull straps. The cowboy hat pattern makes a wide brim hat to wear on your head. They are two different items, and they make a fun matching set.
How big are the finished boots?
Each finished boot is about 11 inches tall from sole to top, and about 10 inches long from toe to heel. The pattern fits a US women's size 7 to 9, and the sizing notes explain how to make a smaller or larger pair.
Can I sell cowboy boots made from this pattern?
Yes, you may sell finished boots made from this free pattern, with credit to Little Loop Finds. Do not sell or republish the pattern text.

More Free Patterns to Try
If you loved these cowboy boots, try another free original pattern next. Make a crochet shark booties pattern free for another fun pair of slippers, or a peacock crochet pattern for a proud amigurumi bird.
Happy stitching, and may your little cowboy boots bring a cozy western smile to every cold morning.


