Platypus Crochet Pattern (Free Amigurumi)
Crochet a soft brown platypus plush with a flat tan bill and a wide flat tail in about five hours, then gift it to an animal lover.

Patterns · Crochet
- Finished size
- 8 in long
- Making time
- 5 hours
- Hook
- US G-6 (4.0 mm)
- Set
- Body, bill, tail
- Skill
- Easy
In this post
- Key Takeaways
- Table of Contents
- Why You Will Love This Platypus
- Finished Size, Skill Level, and Time
- Materials You Need
- Abbreviations (US Terms)
- Gauge and Sizing Notes
- Part 1: The Body, Head, and Bill
- Part 2: The Tail and Feet
- Part 3: Assembly and Face
- Variations: Colors, Sizes, and Uses
- Troubleshooting a Platypus That Does Not Look Right
- Care Instructions
- Frequently Asked Questions
- More Free Patterns to Try
A crocheted platypus is one of the most charming little amigurumi animals you can make, and this free platypus crochet pattern turns soft brown and tan yarn into a cute amigurumi platypus about 8 inches long. It takes about 5 hours and makes a lovely gift.
This is an original Little Loop Finds design, written in US terms and completely free. The platypus is made from a soft brown body, a round head, a flat tan bill, a wide flat beaver-like tail, four short feet, and two tiny ears, all worked in single crochet in the round and in rows.
A quick note on scope: this post is about one specific crochet platypus, a platypus plush with a flat bill, a wide flat tail, and a soft brown body. That makes it different from the other water animals on this site. A free crochet duck pattern makes a duck with a small orange beak, a crochet otter pattern free makes a slim otter, and a crochet whale pattern makes a big round whale. This pattern makes a soft stuffed platypus toy, not a duck or an otter.
Key Takeaways
- Free original pattern: a Little Loop Finds original design, written in US terms, completely free.
- A platypus plush: a soft brown amigurumi platypus with a flat tan bill, a wide flat tail, and four short feet, about 8 inches long.
- Simple stitches: worked in the round and in rows with single crochet, increases, and decreases only.
- A 5 hour project: one platypus takes about 5 hours, worked one piece at a time.
- Great for gifts: a sweet gift for an animal lover, an Australia themed nursery, or a shelf friend.
Table of Contents
- Why You Will Love This Platypus
- Finished Size, Skill Level, and Time
- Materials You Need
- Abbreviations (US Terms)
- Gauge and Sizing Notes
- Part 1: The Body, Head, and Bill
- Part 2: The Tail and Feet
- Part 3: Assembly and Face
- Variations: Colors, Sizes, and Uses
- Troubleshooting a Platypus That Does Not Look Right
- Care Instructions
- Frequently Asked Questions
- More Free Patterns to Try
Why You Will Love This Platypus
A crocheted platypus is a small project with a big payoff. The pieces are quick, so you can finish one foot in about 10 minutes, and the finished platypus sits nicely on a shelf or a windowsill.
The platypus is worked mostly in the round, so there are no long rows to count. You start with a magic ring, increase evenly to make a plump little body, and work the head the same way. The bill and the tail are worked flat in rows, which keeps their shapes neat.
This platypus also makes a wonderful gift for an animal lover. The soft brown body looks like a real platypus, the flat tan bill is sweet, and the wide tail lies flat like a little paddle. Animal lovers enjoy it because the platypus is such an unusual creature, part duck, part beaver, and all cute.
Finished Size, Skill Level, and Time
- Finished size: one size. The platypus is about 8 inches long from bill to tail, and about 4 inches wide across the body. The head is about 3 inches across.
- Skill level: Easy. You need a magic ring, single crochet, increases, decreases, simple color changes, and working flat in rows.
- Time: about 5 hours per platypus: 45 minutes for the body, 30 minutes for the head, 30 minutes for the bill, 30 minutes for the tail, 20 minutes for the feet and ears, and 45 minutes for assembly.

Materials You Need
| Item | What to get |
|---|---|
| Yarn, brown | DK weight yarn in soft brown, about 120 yards |
| Yarn, tan | DK weight yarn in tan, about 60 yards |
| Hook | US G-6 (4.0 mm), or the size that gives you the gauge below |
| Notions | Tapestry needle, scissors, stitch markers, polyester fiberfill, 2 safety eyes (10 mm), brown embroidery floss |
Soft brown DK yarn is the best choice for a platypus because it looks like the fur of a real platypus. A tan DK yarn works best for the bill and the feet, because the pale tan looks like the soft underside of the animal. Use the same brand and weight for both colors.
A stitch marker is the most important notion here, because the body rounds are worked in a spiral with no clear join. Use dark safety eyes for a classic platypus look, and keep brown embroidery floss ready for the mouth and the tiny bill details.
Abbreviations (US Terms)
- ch = chain
- sl st = slip stitch
- sc = single crochet
- inc = increase (2 sc in the same stitch)
- dec = decrease (sc 2 together)
- st(s) = stitch(es)
- rep = repeat
- MR = magic ring
- FO = fasten off
Gauge and Sizing Notes
Gauge matters on amigurumi because the stuffing shows through if the stitches are too loose. Work a swatch of 12 sc and 14 rounds. It should be about 2 inches wide and 2 inches tall.
The pattern is written in one size, about 8 inches long and 4 inches wide. To make a smaller platypus, stop the body after round 6 for a platypus about 6 inches long. To make a larger platypus, add one more increase round to the body and one more row to the bill and tail.
Part 1: The Body, Head, and Bill
The platypus starts with the body, a plump little oval worked in brown yarn, with a round head, a flat tan bill, and two tiny ears. Work it in a spiral in the round, with a stitch marker in the first stitch.
With the brown yarn, make a magic ring for the body.
- Round 1: 6 sc in the ring. (6)
- Round 2: inc in each st around. (12)
- Round 3: (sc in the next st, inc in the next st) rep 6 times. (18)
- Round 4: (sc in the next 2 sts, inc in the next st) rep 6 times. (24)
- Round 5: (sc in the next 3 sts, inc in the next st) rep 6 times. (30)
- Rounds 6-9: sc in each st around. (30)
- Round 10: (sc in the next 3 sts, dec) rep 6 times. (24)
- Round 11: (sc in the next 2 sts, dec) rep 6 times. (18)
- Round 12: (sc in the next st, dec) rep 6 times. (12)
- Round 13: dec in each st around. (6)
Stuff the body firmly with fiberfill before round 12, because the opening gets too small after that. Sl st in the next st and fasten off, leaving a 10 inch tail.
The belly patch is a small oval worked in tan yarn, and it sits on the underside of the body.
- Round 1: 6 sc in the ring. (6)
- Round 2: inc in each st around. (12)
- Round 3: (sc in the next st, inc in the next st) rep 6 times. (18)
- Round 4: sc in each st around. (18)
- Round 5: (sc in the next st, dec) rep 6 times. (12)
- Sl st in the next st and fasten off, leaving a 8 inch tail for sewing.
Do not stuff the belly patch, because it lies flat against the body. The head is a round ball worked in brown yarn.
- Round 1: 6 sc in the ring. (6)
- Round 2: inc in each st around. (12)
- Round 3: (sc in the next st, inc in the next st) rep 6 times. (18)
- Round 4: (sc in the next 2 sts, inc in the next st) rep 6 times. (24)
- Rounds 5-7: sc in each st around. (24)
- Round 8: (sc in the next 2 sts, dec) rep 6 times. (18)
- Round 9: (sc in the next st, dec) rep 6 times. (12)
- Round 10: dec in each st around. (6)
Stuff the head firmly before round 9. Sl st in the next st and fasten off, leaving a 10 inch tail for sewing.
The bill is a flat oval worked in tan yarn, and it sits on the front of the head like a little duck bill. Work it flat in rows, turning at the end of every row.
- Row 1: with the tan yarn, ch 7, 1 sc in the second ch from the hook and in each ch across, ch 1, turn. (6)
- Row 2: 2 sc in the first st, 1 sc in each st across, 2 sc in the last st, ch 1, turn. (8)
- Row 3: 1 sc in each st across, ch 1, turn. (8)
- Row 4: 2 sc in the first st, 1 sc in each st across, 2 sc in the last st, ch 1, turn. (10)
- Rows 5-6: 1 sc in each st across, ch 1, turn. (10)
- Row 7: (sc in the next st, dec) rep 3 times, 1 sc in the last st, ch 1, turn. (7)
- Row 8: (sc in the next st, dec) rep 2 times, 1 sc in the last st. (5)
Fasten off, leaving a 8 inch tail for sewing. Do not stuff the bill, because it lies flat against the head and looks best when it stays thin.
The ears are two tiny half circles worked in brown yarn. With the brown yarn, make a magic ring.
- Round 1: 4 sc in the ring, sl st in the first st to close the half circle. (4)
Fasten off, leaving a 6 inch tail for sewing. Make a second ear the same way.

Part 2: The Tail and Feet
The tail is a wide flat paddle worked in brown yarn, with a tan tip, and it lies flat behind the body like a beaver tail. The feet are four short tubes with tan toes.
With the brown yarn, ch 10 for the tail.
- Row 1: 1 sc in the second ch from the hook and in each ch across, ch 1, turn. (9)
- Row 2: 2 sc in the first st, 1 sc in each st across, 2 sc in the last st, ch 1, turn. (11)
- Row 3: 1 sc in each st across, ch 1, turn. (11)
- Row 4: 2 sc in the first st, 1 sc in each st across, 2 sc in the last st, ch 1, turn. (13)
- Rows 5-7: 1 sc in each st across, ch 1, turn. (13)
- Row 8: change to tan yarn, 1 sc in each st across, ch 1, turn. (13)
- Row 9: (sc in the next st, dec) rep 4 times, 1 sc in the last st, ch 1, turn. (9)
- Row 10: (sc in the next st, dec) rep 3 times. (6)
Fasten off, leaving a 8 inch tail for sewing. Do not stuff the tail, because it lies flat and looks best when it stays thin.
The feet are four short tubes. For tan toes on each foot, work rounds 1 to 2 in tan yarn, then change to brown yarn for rounds 3 to 6. With the tan yarn, make a magic ring.
- Round 1: 6 sc in the ring. (6)
- Round 2: (sc in the next st, inc in the next st) rep 3 times. (9)
- Rounds 3-5: sc in each st around. (9)
- Round 6: (sc in the next st, dec) rep 3 times. (6)
Each foot should be about 2 inches long. Stuff it lightly, and fasten off, leaving a 8 inch tail for sewing. Make 3 more feet the same way.

Part 3: Assembly and Face
Sew the head to the body first, then the belly patch, then the bill, tail, and feet, and add the face last.
Attaching the Head and Belly
Stand the body upright, and mark the top center. Take the head and pin it to the front of the body, with the face pointing forward. Thread a tapestry needle with the tail from the head, and sew the head to the body with a whip stitch around the join.
Take the tan belly patch and pin it to the underside of the body, centered below the head. Thread a tapestry needle with the tail from the patch, and sew it to the body with a whip stitch, working around the edge one stitch at a time.
Attaching the Bill, Tail, and Feet
Take the flat tan bill and pin it to the front of the head, centered and slightly below the middle. Thread a tapestry needle with the tail from the bill, and sew it to the head with a whip stitch around the edge.
Sew the tail to the back of the body, low down and centered, with the tan tip pointing away from the body.
Turn the body on its side, and mark four spots for the feet: two at the front and two at the back. Pin each foot to its spot and sew it on with a whip stitch around the open end. Check that the platypus sits flat before you sew the last foot.
Sew the tiny ears to the top of the head, one on each side, just behind the eyes.
Adding the Face
Place the safety eyes on the head, about 1 inch apart and just above the bill. Push the eyes through the stitches from the front, and press the washers on firmly from the inside. If you add the eyes after stuffing, use embroidered eyes instead, with black yarn and a French knot for each eye. Embroider two tiny nostrils on the bill with brown floss, using a small straight stitch for each one, and a mouth below the bill with a simple curved backstitch.
Variations: Colors, Sizes, and Uses
- Classic platypus: work the platypus in soft brown and tan yarn, exactly as written here.
- Dark platypus: work the platypus in chocolate brown and cream yarn for a richer look on a nursery shelf.
- Bow platypus: tie a small blue ribbon around the neck for a party ready platypus.
- Platypus gift set: pair a platypus with a matching moth crochet pattern for an animal set that looks planned.
Troubleshooting a Platypus That Does Not Look Right
- My bill curls at the edges. The stitches are too tight, or the bill was not blocked. Work the bill rows a little looser, and press the bill flat under a book overnight.
- My tail flops down. The tail was sewn on too high or with too few stitches. Sew it low on the back of the body, and stitch all along the narrow inner edge.
- My platypus looks like a duck. The bill is too big or the tail is missing. Make the bill as written, and sew the wide flat tail on the back.
- My platypus wobbles when it sits. The feet are different lengths, or they were sewn on unevenly. Measure each foot first, and check the platypus sits flat before the last foot.
- My head sits too low. The head was pinned too far down the body. Pin the head at the very front of the body, centered and slightly above the middle.
Care Instructions
Hand wash a crocheted platypus in cool water with a mild detergent, and press the water out gently without wringing. Reshape the bill flat, straighten the tail, and lay the platypus flat to dry.
Frequently Asked Questions
Is this platypus crochet pattern good for beginners?
Yes, it is best for an easy crocheter who knows single crochet, increases, and decreases. The bill and tail are worked flat in rows.
What yarn is best for a platypus?
Soft brown and tan DK weight yarn is the best choice for a platypus, because the brown looks like real platypus fur and the tan looks like its pale underside. Use the same brand and weight for both colors. A cotton yarn also works if you prefer a firmer feel.
How is this different from the duck, otter, and whale patterns?
This pattern makes a soft stuffed platypus plush with a flat bill and a wide flat tail. The duck has a small orange beak, the otter is slim with a long tail, and the whale is big and round.
How big is the finished platypus?
The finished platypus is about 8 inches long from bill to tail and about 4 inches wide across the body. The head is about 3 inches across.
Can I make the platypus without safety eyes?
Yes, you can embroider the eyes instead, which is safer for babies and toddlers. Use black yarn and a French knot for each eye, about 1 inch apart just above the bill.
Can I sell platypuses made from this pattern?
Yes, you may sell finished platypuses made from this free pattern, with credit to Little Loop Finds. Do not sell or republish the pattern text.

More Free Patterns to Try
If you loved this platypus, try another free original pattern next. Make a crochet penguin pattern for another cute animal, or a manatee crochet pattern for a gentle sea animal.
Happy stitching, and may your little platypus bring a happy smile to every room it waddles into.


