Holiday Gift Guide 2026 is live →

Patterns

Bearded Dragon Crochet Pattern (Realistic Amigurumi)

Crochet a realistic bearded dragon amigurumi with a spiky beard and a long tail in about six hours, then gift it to a reptile lover.

Cute handmade crocheted amigurumi bearded dragon lizard plush in warm sandy tan and cream yarn with a spiky beard fringe and long tail sitting on a wooden shelf

Patterns · Crochet

Finished size
12 in long
Making time
6 hours
Hook
US G-6 (4.0 mm)
Set
Head, body, tail
Skill
Easy
Jump to the pattern
In this post
  1. Key Takeaways
  2. Table of Contents
  3. Why You Will Love This Bearded Dragon
  4. Finished Size, Skill Level, and Time
  5. Materials You Need
  6. Abbreviations (US Terms)
  7. Gauge and Sizing Notes
  8. Part 1: The Head, Beard, and Face
  9. Part 2: The Body, Tail, and Legs
  10. Part 3: Assembly and Face
  11. Variations: Colors, Sizes, and Uses
  12. Troubleshooting a Bearded Dragon That Does Not Look Right
  13. Care Instructions
  14. Frequently Asked Questions
  15. More Free Patterns to Try

A crocheted bearded dragon is one of the most charming reptiles you can make with a hook, and this free bearded dragon crochet pattern turns a few balls of yarn into a realistic pet lizard amigurumi about 12 inches long from nose to tail tip. It takes about 6 hours, uses about 260 yards of yarn, and makes a wonderful gift for a reptile lover.

This is an original Little Loop Finds design, written in US terms and completely free. The bearded dragon is made from a wide flat head with a spiky beard, a long low body, four short legs with tiny toes, and a long tapered tail, all worked in single crochet.

A quick note on scope: this post is about one specific crochet bearded dragon, a realistic pet lizard amigurumi with a spiky beard, a flat wide head, and a long tail. That makes it different from a fantasy dragon, which has wings, horns, and a fire breathing look. Our crochet dragon pattern free is the fantasy dragon. This pattern makes the real pet lizard, the calm desert reptile that sits on a rock and puffs out its beard.

Key Takeaways

  • Free original pattern: a Little Loop Finds original design, written in US terms, and completely free.
  • A realistic pet lizard: a wide flat head, a spiky beard, a long low body, four short legs, and a long tapered tail, about 12 inches long.
  • Simple stitches: single crochet, increases, and decreases only, plus a few picot spikes for the beard.
  • A 6 hour project: one bearded dragon takes about 6 hours, worked one piece at a time.
  • Great for gifts: a fun gift for a reptile lover or a nature themed shelf friend.

Table of Contents

Why You Will Love This Bearded Dragon

A crocheted bearded dragon is a small project with a big personality. The pieces are quick, so you can finish one leg in about 10 minutes, and the finished lizard lies flat and looks great on a shelf or a desk.

This bearded dragon also makes a wonderful gift for a reptile lover. Real bearded dragons are calm, friendly pets, and this crocheted version has the same relaxed look.

Finished Size, Skill Level, and Time

  • Finished size: one size. The bearded dragon is about 12 inches long from the tip of its nose to the tip of its tail, and about 3 inches wide across the body. The head is about 3 inches wide, and the tail is about 6 inches long.
  • Skill level: Easy. You need a magic ring, single crochet, increases, and decreases, plus a simple picot stitch for the beard spikes.
  • Time: about 6 hours: 1 hour for the head and beard, 1 hour and 15 minutes for the body, 45 minutes for the tail, 15 minutes for each leg, and 45 minutes for assembly and the face.
Handmade crocheted amigurumi bearded dragon lizard in soft sage green and cream yarn resting on a folded knitted blanket on a bed
A sage green bearded dragon with a cream belly makes a calm, giftable friend.

Materials You Need

ItemWhat to get
Yarn, mainDK weight yarn in sandy tan, about 170 yards
Yarn, bellyDK weight yarn in cream, about 60 yards
Yarn, accentDK weight yarn in dark brown, about 30 yards
HookUS G-6 (4.0 mm), or the size that gives you the gauge below
NotionsTapestry needle, scissors, stitch markers, polyester fiberfill, 2 safety eyes (9 mm), black embroidery floss

Sandy tan DK yarn is the best choice for a crochet bearded dragon because it looks like the real lizard, a warm desert color with a slightly dusty feel. A smooth DK yarn holds its shape when it is stuffed.

Use a stitch marker in the first stitch of every round, because the pieces are worked in a spiral with no joining.

Abbreviations (US Terms)

  • ch = chain
  • sl st = slip stitch
  • sc = single crochet
  • hdc = half double crochet
  • inc = increase (2 sc in the same stitch)
  • dec = decrease (sc 2 together)
  • st(s) = stitch(es)
  • rep = repeat
  • MR = magic ring
  • FO = fasten off
  • picot = ch 3, sl st in the first ch

Gauge and Sizing Notes

Gauge matters on amigurumi because the stuffing shows through if the stitches are too loose, and the bearded dragon looks lumpy if they are too tight. Work a swatch of 12 sc and 14 rounds. It should be about 2 inches square.

Part 1: The Head, Beard, and Face

The bearded dragon starts with the head, a wide flat oval in sandy tan yarn, with a spiky beard underneath and a cream lower jaw. Work the head in a spiral, with a stitch marker in the first stitch of each round.

With the main tan yarn, make a magic ring.

  • Round 1: 6 sc in the ring. (6)
  • Round 2: inc in each st around. (12)
  • Round 3: (sc in the next st, inc in the next st) rep 6 times. (18)
  • Round 4: (sc in the next 2 sts, inc in the next st) rep 6 times. (24)
  • Round 5: (sc in the next 3 sts, inc in the next st) rep 6 times. (30)
  • Round 6: sc in each st around. (30)
  • Rounds 7-8: sc in each st around. (30)
  • Round 9: (sc in the next 3 sts, dec) rep 6 times. (24)
  • Round 10: (sc in the next 2 sts, dec) rep 6 times. (18)
  • Round 11: (sc in the next st, dec) rep 6 times. (12)
  • Round 12: dec in each st around. (6)

Stuff the head firmly before round 11, because the opening gets too small after that. Sl st in the next st and fasten off, leaving a 10 inch tail.

The lower jaw is a small flat oval worked in the cream yarn, and it sits under the front of the head. With the cream yarn, make a magic ring.

  • Round 1: 6 sc in the ring. (6)
  • Round 2: inc in each st around. (12)
  • Round 3: (sc in the next st, inc in the next st) rep 6 times. (18)
  • Round 4: sc in each st around. (18)
  • Sl st in the next st and fasten off, leaving a 8 inch tail.

Do not stuff the lower jaw, because it should lie flat. The beard is a row of small spikes worked along the lower edge of the head. With the dark brown yarn, join to the front lower edge of the head with a sl st. Work a row of picot spikes around the lower front edge: (sc in the next st, picot in the next st) rep 8 times, then sc in the next 2 sts and fasten off.

Close-up of hands crocheting a small amigurumi bearded dragon lizard in tan yarn with a crochet hook on a wooden table, ball of tan yarn nearby
The picot spikes along the lower edge of the head are what turn a plain lizard into a bearded dragon.

Part 2: The Body, Tail, and Legs

The body is a long low oval worked in sandy tan yarn, the tail is a long tapered tube, and the legs are four short tubes. Work each piece in a spiral in the round, and stuff each one lightly as you go.

With the main tan yarn, make a magic ring for the body.

  • Round 1: 6 sc in the ring. (6)
  • Round 2: inc in each st around. (12)
  • Round 3: (sc in the next st, inc in the next st) rep 6 times. (18)
  • Round 4: (sc in the next 2 sts, inc in the next st) rep 6 times. (24)
  • Round 5: (sc in the next 3 sts, inc in the next st) rep 6 times. (30)
  • Rounds 6-12: sc in each st around. (30)
  • Round 13: (sc in the next 3 sts, dec) rep 6 times. (24)
  • Round 14: (sc in the next 2 sts, dec) rep 6 times. (18)
  • Round 15: (sc in the next st, dec) rep 6 times. (12)
  • Round 16: dec in each st around. (6)

The body should be about 5 inches long and 3 inches wide when you reach round 12. Stuff it firmly with fiberfill before you work round 15, but press it gently from the top as you stuff so it stays low and flat, like a real lizard body, instead of round like a ball.

The belly is a flat oval worked in cream yarn. With the cream yarn, ch 12, sc in the second ch from the hook and in each ch across (11), ch 1, turn, and work 5 more rows of 11 sc. Work a round of sc around the edge to smooth it, fasten off, and leave a 10 inch tail for sewing.

The tail is a long tapered tube worked in sandy tan yarn. With the main tan yarn, make a magic ring.

  • Round 1: 6 sc in the ring. (6)
  • Round 2: inc in each st around. (12)
  • Round 3: (sc in the next st, inc in the next st) rep 6 times. (18)
  • Rounds 4-6: sc in each st around. (18)
  • Round 7: (sc in the next 4 sts, dec) rep 3 times. (15)
  • Rounds 8-10: sc in each st around. (15)
  • Round 11: (sc in the next 3 sts, dec) rep 3 times. (12)
  • Rounds 12-14: sc in each st around. (12)
  • Round 15: (sc in the next 2 sts, dec) rep 3 times. (9)
  • Rounds 16-18: sc in each st around. (9)
  • Round 19: (sc in the next st, dec) rep 3 times. (6)
  • Rounds 20-21: sc in each st around. (6)

The tail is about 6 inches long at round 21. Stuff it lightly with fiberfill as you go, but leave the last 2 inches unstuffed so the tip stays soft and can curl. Sl st in the next st and fasten off, leaving a 8 inch tail.

The legs are four short tubes worked in the sandy tan yarn, each with three tiny toes. With the main tan yarn, make a magic ring.

  • Round 1: 6 sc in the ring. (6)
  • Round 2: (sc in the next st, inc in the next st) rep 3 times. (9)
  • Rounds 3-5: sc in each st around. (9)
  • Round 6: (sc in the next st, dec) rep 3 times. (6)

Each leg is about 1.5 inches long at round 6. Stuff it lightly with fiberfill, and fasten off, leaving a 8 inch tail for sewing. Make 3 more legs the same way.

Close-up of a finished handmade crocheted bearded dragon amigurumi in sandy tan yarn showing the textured spiky beard fringe and small dark eyes
The wide flat head, the spiky beard, and the small dark eyes are what make this little lizard easy to recognize.

Part 3: Assembly and Face

This is the part where a head, a body, a tail, four legs, and a belly become a bearded dragon. Sew the head to the body first, then the tail, then the legs and belly, and add the face last.

Attaching the Head and Tail

Lay the body flat on a table, and mark the front center with a stitch marker. Take the head and pin it to the front of the body, with the head sitting low and slightly forward, so the chin nearly touches the table. Thread a tapestry needle with the tail from the head, and sew the head to the body with a whip stitch, one stitch at a time.

Take the tail and pin it to the back of the body, with the tail pointing straight back and curving slightly to one side. Thread a tapestry needle with the tail from the tail piece, and sew it to the body with a whip stitch around the open end. Our free crochet dinosaur pattern uses the same pin first, sew second method on another long tailed animal.

Attaching the Legs, Belly, and Jaw

Turn the body on its side, and mark four spots for the legs: two at the front and two at the back, evenly spaced along the lower sides. Pin each leg to its spot, with the leg pointing down and slightly outward, and sew it on with a whip stitch around the open end.

Sew the cream belly oval to the underside of the body, centered from the chest to the back, with a whip stitch around the edge. Sew the lower jaw to the front underside of the head, centered below the mouth line.

Adding the Face

Place the safety eyes on the head, on the upper sides about 1.5 inches apart, just above and behind the jaw line. Push the eyes through the stitches from the front, and press the washers on firmly from the inside before you close the head. If you add the eyes after stuffing, use embroidered eyes instead, with black yarn and a French knot for each eye. Embroider a small mouth line across the front of the head with black embroidery floss, and add two tiny nostrils above it with a French knot each.

Variations: Colors, Sizes, and Uses

  • Classic sandy tan bearded dragon: work the dragon in sandy tan with a cream belly for the most realistic look.
  • Sage green bearded dragon: work the dragon in soft sage green with a cream belly for a gentle, modern shelf.
  • Red morph bearded dragon: work the dragon in a warm rust red with a cream belly, like the red color morphs real breeders raise.
  • Baby bearded dragon: stop the body after round 10 and the tail after round 15 for a baby about 9 inches long.
  • Desk companion: make the dragon in your favorite team colors and sit it next to a computer monitor.
  • Reptile gift set: pair a bearded dragon with a matching crochet snake pattern and crochet turtle patterns, and add our crochet lizard pattern free for a smaller companion.

Troubleshooting a Bearded Dragon That Does Not Look Right

  • My head looks round instead of wide and flat. You stuffed it too firmly from the top. Press the head gently from the top while you stuff, and sew it low on the body.
  • My beard spikes are too long. Trim them to about half an inch, and keep the picot row tight to the lower edge of the head.
  • My tail will not curl. The tail was stuffed too firmly all the way to the tip. Leave the last 2 inches unstuffed, and bend the tip gently into a curve.
  • My dragon wobbles when it lies flat. The legs are different lengths, or they were sewn on unevenly. Measure each leg before you sew it on.
  • My body looks like a ball instead of a lizard. The body rounds were stuffed too round. Press the body gently from the top as you stuff.

Care Instructions

Hand wash a crocheted bearded dragon in cool water with a mild detergent, and press the water out gently without wringing. Reshape the head, body, and tail and lay the dragon flat to dry away from direct heat. Fluff the beard spikes gently with your fingers once it is dry.

Frequently Asked Questions

Is this bearded dragon crochet pattern good for beginners?

Yes, it is best for an easy crocheter who knows single crochet, increases, and decreases. The pieces are worked in the round, and the only new stitch is a simple picot for the beard spikes.

How is a bearded dragon different from a fantasy dragon in crochet?

A bearded dragon is a realistic pet lizard, with a wide flat head, a spiky beard, four short legs, and a long tail, and no wings or horns. A fantasy dragon has wings and horns. This pattern makes the real pet lizard. If you want the fantasy version, see the fantasy dragon pattern on our site.

What yarn is best for a crochet bearded dragon?

A smooth DK weight yarn in sandy tan is the best choice for the body, head, and tail, because it holds its shape when it is stuffed. A cream DK yarn works best for the belly and lower jaw, and a dark brown DK yarn works best for the beard spikes.

How big is the finished bearded dragon?

The finished bearded dragon is about 12 inches long from the tip of its nose to the tip of its tail, and about 3 inches wide across the body. The head is about 3 inches wide, and the tail is about 6 inches long.

Can I make the bearded dragon without safety eyes?

Yes, you can embroider the eyes instead, which is safer for babies and toddlers. Use black yarn and a French knot for each eye, placed on the upper sides of the head about 1.5 inches apart.

Can I sell bearded dragons made from this pattern?

Yes, you may sell finished bearded dragons made from this free pattern, with credit to Little Loop Finds. Do not sell or republish the pattern text itself.

More Free Patterns to Try

If you loved making this bearded dragon, keep going with more animals from our free pattern library. Try our hamster crochet pattern for a small mammal friend, or browse the library for your next project.

Three handmade crocheted amigurumi bearded dragon lizards in tan, sage green and cream yarn standing together on a sunny windowsill with small potted plants
Three bearded dragons in tan, sage green, and cream make a sweet little reptile family for a shelf or a windowsill.

Happy stitching, and may your little bearded dragon bring a calm smile to every room it sits in.